Drafting/CAD - Model Building & Process Piping Drawing (AOS)

Application Code: 
0419
Degree Received: 
Associate in Occupational Studies (AOS)
Academic Department Info: 
Program Coordinator: 
Karen M. Young
Coordinator Email: 
youngkk@alfredstate.edu
Description: 

360 Virtual TourProcess piping is a specialized area of drafting which uses a language of its own to transmit necessary information for the construction of a project. To achieve this, each student gains the necessary understanding of piping processes for industries such as petroleum distillation, air separation, paper pulping, and chemical processes.

A laptop computer is required for students entering the drafting/CAD-model building & process piping drawing program. See laptop specifications

Student Learning Outcomes: 
  • Demonstrate proper visualization in various views of three-dimensional object by producing a multi-view drawing.
  • Identify, select and apply the sectional view that is appropriate to show interior features for dimensioning.
  • Demonstrate an understanding of manufacturing processes, shop terminology and machine operations.
  • Calculate and apply tolerancing and the relationship between mating parts on assembly drawings.
  • Through calculation, select various appropriate purchased parts for diverse applications.
  • Apply the current welding processes and generate weldment drawings using industrial standards.
  • Illustrate various exploded isometric drawing methods using standard technical practical applications.
  • Demonstrate a working knowledge of the fundamentals of architectural drafting to complete a set of drawings.
  • Solve practical drafting-related problems using accepted mathematical applications.
Entrance Requirements & Recommendations: 

Recommended: Algebra

Technical Standards: 

Applicants in any of the drafting/CAD programs must meet the following physical requirements:

  • Must be able to visually read computer monitor or laptop.
  • Must be capable of using digitizing equipment.
  • Must have good hand/eye coordination to operate the above.
Accreditation/Certification: 

All drafting/CAD programs are certified by the ADDA (American Design and Drafting Association). Independently from Alfred State College, all students will have several opportunities to obtain national certification as qualified entry-level drafters by successful completion of the ADDA Exam.

Features & Facilities: 

Teaches specialized methods and skills needed to construct a piping system.

  • Detail and assembly drawings
  • Use of pneumatic and hydraulic control systems
  • Piping process layout
  • Piping and instrumentation diagrams
  • Unigraphics Nx4
Graduation Requirements: 

A student must successfully complete all courses in the prescribed four-semester program and earn a minimum cumulative index of 2.0, which is equivalent to a "C" average. Students are also required to have earned grades of "C" or better in technical calculations I & II. (Articulation is available in this area.)

A "C" or better for DCAD 4003 senior project is required.

Career Opportunities: 
  • Pressure Vessel Designer
  • Sales Representative
  • Checker
  • Field or Service Engineer
  • Structural Detailer
  • Process Technician
  • Drafting Manager
  • Process Piping Drafter
  • Designer
  • CAD Drafter
  • Piping Designer
  • Controls Drafter
  • Parts Analysts

Upon successful completion of this program, students may continue in Alfred State's BBA program in technology management.

Direct Entry Into Baccalaureate Degree Program: 

Alfred State drafting/CAD: model building and process piping drawing graduates may enter directly into the technology management BBA degree program.

Typical Semester Layout: 

All students on the School of Applied Technology Campus at Wellsville spend a total of six hours in class each day. In the Computerized Design and Manufacturing Department, approximately one-to-two hours each day are spent in a classroom lecture-type setting and the remaining four-to-five hours of the day are used to complete many exciting, industrial-type assignments in laptop drafting labs.Students attend class from approximately 8 a.m. to 3 p.m., five days a week. As a result of this full schedule, the student will experience a total of 450 drafting hours in each semester.

First Semestercredits
DCAD1205Intro to Ind Dftg5
DCAD1305Industrial Drafting I5
DCAD1405Industrial Drafting II5
DCAD1053Technical Calculations I3
   18
Second Semestercredits
DCAD2205Industrial Drafting III5
DCAD2305Welding Drawing5
DCADxxx5Technical Elective5
DCAD2063Technical Calculations II3
   18
Third Semestercredits
DCAD3024Layout & Detail4
DCAD3044Fluid Power4
DCAD3104Advanced Mech Layout4
DCAD3023GD&T3
DCAD2053Intro to Unigraphics3
   18
Fourth Semestercredits
DCAD4125Process Piping I5
DCADxxx5Technical Illustration5
DCAD4335CNC Machine Program’g5
DCAD4003Senior Project3
   
18
Second Semester Electives
DCAD2805 Drafting for Res Construction5
DCAD4155Technical Illustration I5
Fourth Semester Electives
DCAD4225 Process Piping II*5
DCAD4155Technical Illustration I5
DCAD2805 Drafting for Res Contruction5
DCAD4900Industrial Application5
*Prerequisite:DCAD 4125 process piping I
Employment and Transfer Rate: 
100%
Employment and Transfer Survey Details: 
Survey Details201020112012
Receiving Degrees588
Responding to Survey4 (80%)7 (88%)6 (75%)
Employed4 (100%)6 (86%)6 (100%)
Employed in Field4 (100%)5 (83%)6 (100%)
Transferred--1 (14%)--
Unemployed & Seeking Employment------
Unemployed & Not Seeking Employment------
Employment and Transfer Salary Information: 

$30,000 - $39,999 (2)
$40,000 - $49,999 (3)
Prefer not to disclose (1)